How to Load Linsn the CON and RCG file after installed the LEDStudio.

After we installed the LINSN LEDStudio, How to setup the LEDStudio and load the CON and RCG file to the LED receiving card,here is the pictures to show you and make sure the led display screen work well with the right CON and RCG file.

1. Run the LEDstudio.Options Software Setup.

2.Click the Software setup window. DO NOT TOUCH anything. Just type “linsn” then will appear a password window, the password is: “168”

3.Loading the CON file and RCG file to the led control card according to the following pictures. Send it to the led receiver, and save it to the led receiver.

This is the CON file of 5x3, you can set the CON file by yourself according to your led display panel resolution

4.After we send the RCG and CON file to the led display screen,Then you can play the video using the controlling computer by Linsn LEDStudio.